[News] Redsn0w 0.9.5 B5-5 released ! *MMS issue fixed*


Update : Redsn0w 0.9.5 Beta 5 - 5 is out !!


The iPhone DevTeam just released another update to redsn0w which comes to version 0.9.5b5-5. Some users were unable to send and receive MMS messages, and if you are one of them, here is your fix.

To use this version of redsn0w, and fix your issues, all you need to do is to re-run the tool over your existing jailbreak. If you do that, make sure you don’t install Cydia again. Just de-select Cydia when you will be asked what packages you want to install.

TUTORIAL FOR REDSNOW

Download redsn0w 0.9.5b5-5:


Read more...

[News] iPhone 4 Jailbroken But Can NOT Be Released Publicly



MuscleNerd just posted a tweet congratulating PlanetBeing, comex and chpwn for another userland jailbreak. The image above is a high-resolution screenshot of Cydia ( scaled down to 550px wide, to fix into the post body ) running on the iPhone 4.

Unfortunately, the tool cannot be released publicly yet, because it uses some of Apple’s software.
P0sixninja says: ‘the jailbreak shown is a more of a stepping stone for us, it can’t be released because it includes some of apples software’
Planetbeing: ‘Don’t want to speak for @comex, but afaik no one has breathed a word about release date and what we have right now is nowhere ready’

Below, Cydia in High Res.


Read more...

[News] Apple To Release iOS 4.01 on Monday ??



You know that the reception issues of the iPhone 4 might be just an iOS 4.0 bug. AppleInsider reports that Apple’s tech support forums originally confirmed that a iOS 4.0.1 software fix addressing the issue would ship early next week (as early as Monday), before the comments were subsequently taken down along with all the other related discussion about the matter.

The fix is expected to address a issue in iOS 4 related to radio frequency calibration of the baseband. Readers who saw the original forum discussions say that the issue is believed to occur when switching frequencies; because the lag is allegedly not calibrated correctly, it results in the device reporting “no service” rather than switching to the frequency with the best signal to noise ratio.
iOS 4 introduced some enhancements to how the baseband selects which frequencies to use, so it makes sense that the error may have crept into those changes. Additionally, this explains why iOS 4 has also caused similar problems for iPhone 3Gs users.
Other related experiences that also corroborate the idea that the issue is related to iOS 4′s software control of the baseband, including the fact that the issue seems easily reproducible when connecting to a WWAN 3G network but does not appear when connecting to a Microcell 3G. If the problem were simply hardware related issues of the antenna design, it should only affect iPhone 4 units with that new design and should occur at all times, regardless of the tower type. That is not being observed.
If Apple updated the iOS on Monday, they also might update the baseband. But it can also mean that they will just push more juice towards the antennas. If you don’t experience any issues with your brand new iPhone 4 , do not update to 4.01 ( if they will address the issue so fast ). If you unlocked your iPhone with ultrasn0w 0.9.3 and you experience issues on your iPhone 3G/3Gs, do not update either.
Wait until we confirm if the new iOS updates the baseband or not. Otherwise, you will loose your unlock…


Read more...

[How-To] Jailbreak your iDevice Firmware iOS 4.0 *Update*

Read more...

News iTunes 9.2 Released : Not Safe for Spirit Jailbreakers *Update : Fixed*



Update : Spirit was updated ! It solves the compatibility issue with iTunes 9.2 !!


Click 
the image to open in full size.

While we had been under the impression that iTunes 9.2 would be released alongside iOS 4, it appears that Apple has already pushed the update for iTunes to the public, ahead of the scheduled release with iOS 4 on June 21st, 2010.

With this update comes some warning notes for the Jailbreak community, as iTunes 9.2 is not fully compatible with the recent Spirit Jailbreak tool. It is currently recommended to stay away from iTunes 9.2 all together unless you have the need to be on iOS 4 GM. If your not familiar with this, then stop what your doing and simply wait this one out.

If you have not yet jailbroken your device and have iTunes 9.2 installed already, DO NOT ATTEMPT TO JAILBREAK. Your device will go into an infinite boot loop.

If your iDevice is already jailbroken with Spirit prior to iTunes 9.2, then you shouldn't have any problems, but we still recommend to stay away from this update for now. Comex is aware of this and is looking into the issue further to see if he can't patch things up. Patience my friends.

IF your using tools other than Spirit, The iPhone Dev Team has confirmed there are no problems with PwnageTool or RedSn0w with the new iTunes 9.2. So those are you best bet for jailbreaking tools if your already on iTunes 9.2 and need to jailbreak.
Read more...

[News] Gyroscope's iPhone 4 in action !



Just have a look to this video.


Read more...

Sniper Shoots iPhone 4 In Slow Motion *Humour*




Just have a look to this video !


Read more...

iPhone 4: Will It Blend? *Humour*


Tom blends the iPhone 4, but not everyone wants to see it destroyed. Go to www.blendtec.com and enter to win your very own iPhone 4 with a 2-year AT&T contract compliments of Blendtec!



Read more...

Winterboard 0.9.3211-1


Update : Version 0.9.3211-1 released ! Safe install and now fully compatible with iOS 4.0 !!


Download 0.9.3211-1 : 4shared
Download Pincrush : 4shared

After having jailbroken your iPhone or iPod Touch, you mlust now customize it !
Winterboard is a MUST-HAVE application that every jailbroken iPhone must have. It permits you to customize your Springboard and add many tweaks.



 



IMG_0006

  • Available on Cydia.

Notes :

-------------------------------------
Previous Version
0.9.3157-1 : 4shared
0.9.3156-1 : 4shared
0.9.2993-1 : 4shared
    Read more...

    Exchange Unlock 2.0



    Download 2.0 : Official

    When you turn on an Exchange email account, iPhone auto-locks the screen so that a password is needed every single time you slide the slider. That is pretty annoying. This tool gets rid of that, so that you don't have to enter a password every time. Note: this means that essentially this gets rid of password protection completely from your iphone springboard main screen.

    NO SCREENSHOTS AVAILABLE


    Notes :
    Read more...

    [How-To] Jailbreak your iPhone 3G FW 4.0 using RedSn0w [Windows]


    These are instructions on how to jailbreak your iPhone 3G on the 4.0 firmware using RedSn0w for Windows and iTunes 9.2. The Mac version of this tutorial is here.

    This tutorial can be used to jailbreak before applying the UltraSn0w unlock. You can find instructions on how to apply the unlock here. It will also hacktivate your device for those not with an official carrier.

    Step One
    Create a folder on your desktop called Pwnage

    Download RedSn0w from here and place it in the Pwnage folder. Likewise, download the latest 4.0 firmware from below and place it in the same folder.

    4.0.0 (3G): iPhone1,2_4.0_8A293_Restore.ipsw

    Extract the redsn0w executable from the RedSn0w zip file into the same folder.




    Step Two
    Connect your iPhone to the computer and launch iTunes. 




    Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.




    Navigate to the Pwnage folder on your desktop and select the firmware ipsw. Click the Choose button to continue. 




    Step Three
    Once iTunes has finished updating your iPhone to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.




    Step Four
    Once RedSn0w opens click the Browse button




    Step Five
    Select the firmware ipsw we placed in the Pwnage folder on our desktop then click Open.




    Step Six
    Once the firmware has been verified click the Next button to continue.




    Step Seven
    RedSn0w will now prepare the jailbreak data

    Step Eight
    From this window you can select the jailbreak options you would like.




    Verbose boot displays detailed information on boot of your device and is generally only needed by developers and advanced users.

    Make sure Cydia is selected. For this tutorial we will also select Custom boot logo and Custom recovery logo.

    When you click to select each custom logo option a dialog window will appear asking you to select the image. Locate the image you would like to use then press the Open button.




    *Remember the rules for boot logos are: RGB or Grayscale format with Alpha channel and dimension below 320x480.

    Notice that RedSn0w has already selected to Enable multitasking, Enable homescreen wallpaper, and Enable battery percentage. If you do not need multitasking we would recommend deselecting it as it makes your iPhone 3G run very slow.

    Click the Next button to continue




    Step Nine
    Please plug your iPhone into the computer and make sure its OFF then click the Next button




    Step Ten
    RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here


    Hold down both the Home button and the Power button for 10 seconds.




    Release the Power button and continue holding the Home button until RedSn0w detects the device.




    Step Eleven
    Your iPhone will now reboot


    Step Twelve
    RedSn0w will then begin uploading the new RAM Disk and Kernel.




    Step Thirteen
    Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.




    You can now unlock your device using UltraSn0w by following these instructions.
    Read more...

    [How-To] Jailbreak your iPhone 3G FW 4.0 using RedSn0w [Mac]


    These are instructions on how to jailbreak your iPhone 3G on the 4.0 firmware using RedSn0w for Mac and iTunes 9.2. The Windows version of this tutorial is here.

    This tutorial can be used to jailbreak before applying the UltraSn0w unlock. You can find instructions on how to apply the unlock here. It will also hacktivate your device for those not with an official carrier.

    Step One
    Create a folder on your desktop called Pwnage

    Download RedSn0w from here and place it in the Pwnage folder. Likewise, download the latest 4.0 firmware from below and place it in the same folder.

    4.0.0 (3G): iPhone1,2_4.0_8A293_Restore.ipsw

    Extract the redsn0w app from the RedSn0w zip file by double clicking it.


    Step Two
    Connect your iPhone to the computer and launch iTunes. 




    Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.




    Navigate to the Pwnage folder on your desktop and select the firmware ipsw. Click the Choose button to continue.


    Step Three
    Once iTunes has finished updating your iPhone to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.




    Step Four
    Once RedSn0w opens click the Browse button


    Step Five
    Select the firmware ipsw we placed in the Pwnage folder on our desktop then click Open.


    Step Six
    Once the firmware has been verified click the Next button to continue.


    Step Seven
    RedSn0w will now prepare the jailbreak data


    Step Eight
    From this window you can select the jailbreak options you would like.


    Verbose boot displays detailed information on boot of your device and is generally only needed by developers and advanced users.

    Make sure Cydia is selected. For this tutorial we will also select Custom boot logo and Custom recovery logo.

    When you click to select each custom logo option a dialog window will appear asking you to select the image. Locate the image you would like to use then press the Open button.




    *Remember the rules for boot logos are: RGB or Grayscale format with Alpha channel and dimension below 320x480.

    Notice that RedSn0w has already selected to Enable multitasking, Enable homescreen wallpaper, and Enable battery percentage. If you do not need multitasking we would recommend deselecting it as it makes your iPhone 3G run very slow.

    Click the Next button to continue


    Step Nine
    Please plug your iPhone into the computer and make sure its OFF then click the Next button


    Step Ten
    RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here


    Hold down both the Home button and the Power button for 10 seconds.


    Release the Power button and continue holding the Home button until RedSn0w detects the device.


    Step Eleven
    Your iPhone will now reboot


    Step Twelve
    RedSn0w will then begin uploading the new RAM Disk and Kernel.


    Step Thirteen
    Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.


    You can now continue to unlock your device using UltraSn0w with these instructions.
    Read more...