Below are various different custom firmware files that were created using Pwnage Tool 4.1 download these if you are weary of creating your own. Your device MUST be in pwned-DFU mode for these firmware files to restore properly(read below). Make sure you read the description of each firmware CAREFULLY so that you know what you are installing.
*IMPORTANT* In order to restore these custom firmware files, you must use Pwnage Tool(Mac) to enter DFU mode. If you have Windows, you can now use Redsn0w 0.9.6b2 to enter pwned-dfu mode which will allow you to install the custom firmware files. You must use one of these methods in order for the restore to work or you will get iTunes errors.

IF YOU GET 1600,1601, 16xx ISUES WITH ITUNES, GO THERE !

iPhone 4 Custom 4.1 Firmware

1. iPhone 4 4.1 UNACTIVATED
  • Works for iPhone 4
  • Not Activated
  • 1000 MB Root Partition
  • Packages Installed
    -Cydia
    -OpenSSH
- This version is NOT-ACTIVATED and is for users who are using their iPhone 4 on an Official Carrier i.e. AT&T.
Part 1
Part 2
Part 3
2. iPhone 4 4.1 ACTIVATED
  • Works for iPhone 4
  • Activated
  • 1000 MB Root Partition
  • Packages Installed
    -Cydia
    -OpenSSH
- This version comes ACTIVATED and is for users who are using their iPhone 4 on a NON-OFFICIAL CARRIER i.e. T-Mobile etc. This version will still work for AT&T as well.
– After restoring with this firmware you will need to add the repo http://repo666.ultrasn0w.com and install ultrasn0w to unlock your device
Part 1
Part 2
Part 3

iPhone 3Gs Custom 4.1 Firmware

1. iPhone 3Gs 4.1 UNACTIVATED
  • Works for iPhone 3Gs
  • Not Activated
  • 1000 MB Root Partition
  • Packages Installed
    • Cydia
    • OpenSSH
- This version is NOT-ACTIVATED and is for users who are using their iPhone 3GS on an Official Carrier i.e. AT&T.
Part 1
Part 2
2. iPhone 3Gs 4.1 ACTIVATED
  • Works for iPhone 3Gs
  • Not Activated
  • 1000 MB Root Partition
  • Packages Installed
    • Cydia
    • OpenSSH
- This version comes ACTIVATED and is for users who are using their iPhone 3Gs on a NON-OFFICIAL CARRIER i.e. T-Mobile etc. This version will still work for AT&T as well.
Part 1
Part 2

iPhone 3G Custom 4.1 Firmware

1. iPhone 3G 4.1 UNACTIVATED/Nothing Enabled

  • Works for iPhone 3G
  • Not Activated
  • NOTHING ENABLED: Multitasking, Homescreen Wallpaper, Battery Percentage Indicator
  • 800 MB Root Partition
  • Packages Installed
    • Cydia
    • OpenSSH
  • Custom Boot & Restore Logos
- This version is NOT-ACTIVATED and is for users who are using their iPhone 3G on an Official Carrier i.e. AT&T.
– This version DOES NOT come with Multitasking, Homescreen Wallpaper, Battery Percentage Indicator ENABLED. You can still enable it manually if you would like using other methods.
Part 1
Part 2
2. iPhone 3G 4.1 UNACTIVATED/Everything Enabled
  • Works for iPhone 3G
  • Not Activated
  • EVERYTHING ENABLED: Multitasking, Homescreen Wallpaper, Battery Percentage Indicator
  • 800 MB Root Partition
  • Packages Installed
    • Cydia
    • OpenSSH
  • Custom Boot & Restore Logos
- This version is NOT-ACTIVATED and is for users who are using their iPhone 3G on an Official Carrier i.e. AT&T.
– This version comes with Multitasking, Homescreen Wallpaper, Battery Percentage Indicator ENABLED.
Part 1
Part 2
3. iPhone 3G 4.1 ACTIVATED/Nothing Enabled

  • Works for iPhone 3G
  • Activated
  • NOTHING ENABLED: Multitasking, Homescreen Wallpaper, Battery Percentage Indicator
  • 800 MB Root Partition
  • Packages Installed
    • Cydia
    • OpenSSH
  • Custom Boot & Restore Logos
- This version comes ACTIVATED and is for users who are using their iPhone 3G on a NON-OFFICIAL CARRIER i.e. T-Mobile etc. This version will still work for AT&T as well.
– After restoring with this firmware you will need to add the repo http://repo666.ultrasn0w.com and install ultrasn0w to unlock your device
– This version DOES NOT come with Multitasking, Homescreen Wallpaper, Battery Percentage Indicator ENABLED. You can still enable it manually if you would like using other methods.
Part 1
Part 2
4. iPhone 3G 4.1 ACTIVATED/Everything Enabled
  • Works for iPhone 3G
  • Activated
  • EVERYTHING ENABLED: Multitasking, Homescreen Wallpaper, Battery Percentage Indicator
  • 800 MB Root Partition
  • Packages Installed
    • Cydia
    • OpenSSH
  • Custom Boot & Restore Logos
- This version comes ACTIVATED and is for users who are using their iPhone 3G on a NON-OFFICIAL CARRIER i.e. T-Mobile etc. This version will still work for AT&T as well.
– After restoring with this firmware you will need to add the repo http://repo666.ultrasn0w.com and install ultrasn0w to unlock your device
– This version comes with Multitasking, Homescreen Wallpaper, Battery Percentage Indicator ENABLED.
Part 1
Part 2

iPod Touch 4G Custom 4.1 Firmware

1. iPod Touch 4G
  • Works for iPod Touch 4
  • 900 MB Root Partition
  • Packages Installed
    • Cydia
    • OpenSSH
Part 1
Part 2
Part 3

iPod Touch 3G Custom 4.1 Firmware

1. iPod Touch 3G
  • Works for iPod Touch 3
  • 900 MB Root Partition
  • Packages Installed
    • Cydia
    • OpenSSH
Part 1
Part 2

iPad Custom 3.2.2 Firmware

1. iPad
  • Works for iPad
  • 1200 MB Root Partition
  • Packages Installed
    • Cydia
    • OpenSSH
Part 1
Part 2
Part 3
—————————————————————————————
NOTES
After you install your pre-jailbroken firmware, DO NOT use a jailbreak tool like limera1n or greenpois0n. The whole point of these custom firmware files is that they come PRE-JAILBROKEN. All you have to do is shift+restore with them and when your device starts up it will already be jailbroken. If you do install one of the jailbreaks you will have to start the whole process over again.
The iPhone 3G firmware files use custom boot and recovery screens, at this time, the iPhone 3G is the ONLY device that supports custom logos. The logos used in these firmware files can be seen below:

If you like this post, share it ! | Post views: